Mista Perry Wu Daraktan tallace-tallace na kasa da kasa
3Y 4Y 5Y Dental Grade Zirconia Zro2 Shirye don Latsa CAS1314-23-4
- Samfura
- Zirconia masana'antu
- Kayayyakin Duniya Rare
- Alumina
- Carbide
- Nitride
- Kayan yumbura
- Kayayyakin Graphite
- Nano Materials
- Spherical Spray Material
- Babban Tsarkake Karfe Foda
- Babban Siyar da Zafafan Kayan Aiki
01
Suoyi Cold Isostatic Pressing CIP Equipment Hydraulic Press for Zirconia Yttrium Stabilized Zirconium Technical Ceramics CIP Har zuwa 400max
| Suna | Mai Latsa Ciki na Hydraulic |
| Suna 1 | Na'ura mai aiki da karfin ruwa Press 100t |
| Suna2 | Dental Hydraulic Press |
| Suna 3 | Injin Bugewa |
| Suna4 | Cold Isostatic Pressing Machine |
| Nau'in | Gantry Hydraulic Press |
| Kunshin sufuri | Akwatin katako |
| Sharadi | Sabo |
| Takaddun shaida | ISO9001 |
| Aikace-aikace | Fasaha Ceramics |
| Kayan abu | Karfe |
| Samfurin NO. | CIP |
| Ƙayyadaddun bayanai | 2000*1350*1500 |
| Alamar kasuwanci | Suoyi |
| Asalin | China |
| HS Code | 8486202200 |
| Ƙarfin samarwa | 10 Saiti/wata |
| Model | SY-KJYu100 | SY-KJYu150 |
| Diamita mai amfani na jirgin ruwa mai ƙarfi (mm) | 100 | 150 |
| zurfin jirgin ruwa mai amfani (mm) | 300 | 300 |
| Matsakaicin matsi na aiki (MPa) | 100-400 | 100-350 |
| Wutar da aka shigar (Kw) | 9 | 9 |
| Dumama | Ana iya yin zafi zuwa digiri 90 na Celsius (wanda ba daidai ba) | |
| Hanyar ciyarwa | Zaɓa ta atomatik | |
| Ƙimar haɓakawa | Ana iya saita daidai | |
| Matsakaicin aiki | Mai hana tsatsa na tushen mai ko ruwa | |
| HMI | Cikakken launi tabawa | |
| Yi rikodin bayanan fitarwa na bayanai | USB | |
| Hanyar tuƙi | Na'ura mai aiki da karfin ruwa drive | |
| Hanyar sanyaya | Ruwa sanyaya | |
| Girma (mm) | Ba fiye da 1750×1190×1370 ba | Ba fiye da 2000×1350×1500 ba |
| Nauyin kayan aiki (t) | ||
Siffofin:
Sauƙaƙan ɗagawa ta atomatik da caji, ba tare da wani kayan taimako ba.
1.Intuitive mai amfani dubawa tare da cikakken launi graphics.
2.Matsakaicin matsa lamba mai amfani da mai amfani zai iya kaiwa 300, 350 ko 400MPa, don haka zai dace da buƙatun buƙatun kayan aiki da yawa.
3.Setting da kuma kula da madaidaicin matsi mai mahimmanci. Dukkanin bayanan sake zagayowar matsin lamba ana iya rikodin su kuma ana iya gano su, wanda ke ba da damar kwatanta bambancin ɓata tasirin kayan a ƙarƙashin matakai daban-daban na latsa isostatic.
4.With tsawo na kasa da 1.5m, da kuma bene na kasa da 2.5m2, kayan aiki ya dace da sanyawa a yawancin dakunan gwaje-gwaje.
Tsarin Gudanarwa:
Allon taɓawa + canjin membrane (tsarin sarrafa servo)
1) Dauki allon taɓawa na kamfanin LG, tsarin zai ba da amsa nan da nan bayan lambobin ku sun taɓa maɓallin akan allon.
2) Abokan hulɗar ɗan adam-kwamfuta, wanda yake da sauƙin fahimtar yadda ake saita sigogin aiki.
3) Maɓalli na membrane yana haɗe zuwa saman majalisar kulawa, kuma zane-zanensa yana sa sauƙin fahimta.
Don sauƙaƙe mataimakan dakin gwaje-gwaje don sarrafa matsi na hawan / taimako, jerin U suna sanye da sauƙin sarrafawa mai sauƙin amfani. Ɗauki waɗannan rukunin sigogin da aka saita a matsayin misali:
Saitin farko na bayanai: Yana nufin cewa yana ɗaukar 90s don ƙara matsa lamba zuwa 300MPa daga 0MPa, da kiyaye matsa lamba don 15s;
Saitin bayanai na biyu: Yana nufin cewa yana ɗaukar 20s don sakin matsa lamba zuwa 220MPa daga 300MPa, kuma kiyaye matsa lamba don 10s;
Saitin bayanai na uku: Yana nufin cewa yana ɗaukar 30s don sakin matsa lamba zuwa 90MPa daga 220MPa, kuma kiyaye matsa lamba don 20s;
Saitin bayanai na huɗu: Yana nufin cewa yana ɗaukar 27s don sakin matsa lamba zuwa 0MPa daga 90MPa.
Masu amfani za su iya saita saiti shida na bayanai gaba ɗaya, ko saita 2, 3, 4 ko 5 daga cikinsu. Gabaɗaya, matsa lamba na saitin bayanan ƙarshe ya kamata ya zama 0MPa, yana nuna cewa an saki matsa lamba gaba ɗaya kuma buɗewar yana samuwa.
Bayan saita maɓallin matsa lamba da ake buƙata, mataimakan lab na iya lura da matsi na ainihin lokacin akan allon, kuma waɗannan bayanan tsarin za a adana su a cikin tsarin, ta yadda zaku iya sake kunna su kai tsaye akan allon ko zazzage su zuwa kwamfutarka ta USB. dubawa.
Tsaro:
Don tabbatar da samar da aminci na injin latsawa, akwai saitunan tsaro da yawa a cikin injin latsawa.
1. Manual matsa lamba bawul. A cikin kowane yanayi na gaggawa ko gazawa, buɗe bawul ɗin da hannu don ba da damar kariya ta matsi, kuma ana iya ƙara matsa lamba bayan rufe shi.
2. Na'urar firikwensin matsin lamba da tsarin kula da kayan aikin lantarki. Lokacin da matsa lamba na aiki ya wuce ƙimar matsa lamba da aka saita, tsarin sarrafa kayan aikin lantarki zai dakatar da aikin babban caji ta atomatik kuma yayi aiki da tsarin da ya rage don gudanar da kariyar taimako.
3. Gidan kulawa yana sanye da maɓallin kashewa, wanda ake amfani dashi don dakatar da aikin na'ura a kowane mataki na aiki bayan danna wannan maɓallin.
4. Haɗin kai na hanyoyin sarrafa kayan lantarki. Lokacin da na'urar latsawa ke aiki daidai da hanyoyin aiki, idan tsarin da ya gabata bai cika ba ko tare da gazawa, injin latsawa ba zai iya ci gaba zuwa hanya ta gaba ba, kuma zai aika siginar gazawar aiki. An kawar da gazawar kawai, na'urar latsawa na iya ci gaba zuwa hanya ta gaba.
01
