Ọgbẹni Perry Wu International Sales Oludari
Tungsten Carbide
- Ọja
- Zirconia ile-iṣẹ
- Toje Earth Products
- Alumina
- Carbide
- Nitride
- Awọn ọja seramiki
- Awọn ọja Graphite
- Awọn ohun elo Nano
- Ohun elo Sokiri Ti iyipo
- Ga ti nw Irin lulú
- Gbona tita to ti ni ilọsiwaju ohun elo
01
Tungsten Tungsten Mimo giga-giga Tungsten Carbide Powder Ultra-Fine Tungsten Powder
| Ohun elo | Gbona spraying, Ndan ohun elo |
| Apẹrẹ | ti iyipo Powder, iyipo Powder |
| Ohun elo | Cr20,Ni7.0C5.8,W, Cr20,Ni7.0C5.8,W |
| Orukọ ọja | Chromium carbidi lulú-WC-CrC-Ni |
| Ijẹrisi | ISO9001 |
| Àwọ̀ | Grẹy |
| Apperant iwuwo | 4.3-4.8g / cm3 |
| anfani | antioxidant ti o dara julọ ati ipata |
| apẹẹrẹ | Wa |
| MOQ | 1kg |
| Ohun elo | Dada Spraying, Petroleum Industry |
| Apẹrẹ | lulú |
| Ohun elo | Tungsten Carbide |
| Kemikali Tiwqn | W/99.8;S/0.05max;P/0.07max |
| Orukọ ọja | Tita Gbona Sokiri Fused WC Tungsten Carbide Powder Fun Spraying |
| Ohun elo | aaye yo giga, iṣẹ to dara lori egboogi-aṣọ |
| Àwọ̀ | Silver Grey |
| Awọn iwọn | 0.38 ~ 0.85mm |
| Mimo | 95% |
| Oruko oja | HR |
| Awọn koko-ọrọ1 | tungsten carbide wc lulú |
| Awọn koko-ọrọ2 | tungsten carbide lulú metallurgy |
| Awọn koko-ọrọ3 | wc lulú |
01
WC-Co10Cr4 jẹ lulú ti o da lori tungsten lile lile, eyiti o gba agglomeration ati ilana isunmọ. O jẹ Layer cobalt irin ti a bo lori dada ti simẹnti tungsten carbide fun aabo ati isunmọ, eyiti o ni resistance to dara julọ si yiya abrasive ati abrasion. Agbara lati koju ifoyina otutu otutu. Dara fun pilasima spraying tabi supersonic spraying ilana. Ti a lo nigbagbogbo ni awọn iṣẹlẹ to nilo atako yiya ti o lagbara, gẹgẹbi awọn awo itọnisọna, awọn ọpa, awọn ibi ifasilẹ lile, ati bẹbẹ lọ.
Ipilẹ kẹmika lulú: 86%(WC)+10%(Co)+4%(Cr)
Lile ti sokiri alurinmorin Layer: Hv200>1100
Awọn nkan ti o nilo akiyesi: 1. Awọn lulú ti pin si meji powders fun pilasima spraying ati supersonic spraying.
2. Jọwọ ṣiṣẹ ni ibamu ti o muna pẹlu awọn ibeere ti ilana isunmi ti o baamu, ati iwọn patiku lulú le ṣe atunṣe.
3. Ti lulú ba gba ọrinrin, o yẹ ki o gbẹ ṣaaju lilo
Gbona Sokiri Fused WC Tungsten Carbide Powder Fun Spraying
SUOYI nfunni awọn oriṣi mẹta ti lulú WC ati ọpọlọpọ iwọn patiku fun oriṣiriṣi
1.Cast WC lulú
2.Spherical simẹnti WC lulú
3.Macro-crystal WC lulú
Iwọn patiku:1-3um,10-38um.15-45um.15-53um….tabi ṣe iwọn.
Tungsten carbide compund powder bii wc-12co/17co WC-Ni
| Simẹnti WC Tungsten Carbide lulú tiwqn –% | ||||
| Ipele | WC-40100 | WC-40130 | WC-40140 | WC-40150 |
| IN | 95-96 | 92-93 | 91-92 | 90-91 |
| TC | 3.8-4.1 | 3.8-4.1 | 3.8-4.1 | 3.8-4.1 |
| FC | ≦0.08 | ≦0.08 | ≦0.08 | ≦0.08 |
| Ti | ≦0.1 | ≦0.1 | ≦0.1 | ≦0.1 |
| Ni | / | 2.5-3.5 | 3.5-4.5 | 4.5-5.5 |
| Kr | ≦0.1 | ≦0.1 | ≦0.1 | ≦0.1 |
| IN | ≦0.05 | ≦0.05 | ≦0.05 | ≦0.05 |
| Ati | ≦0.02 | ≦0.02 | ≦0.02 | ≦0.02 |
| Fe | ≦0.3 | ≦0.3 | ≦0.3 | ≦0.3 |
| O | ≦0.05 | ≦0.05 | ≦0.05 | ≦0.05 |
WC CrC Ni jẹ líle chromium nickel carbide lulú ti a bo. O adopts agglomeration sintering process.It ti wa ni commonly lo ninu gbona sokiri tabi ni ipo ibi ti lagbara yiya resistance wa ni ti beere.Tungsten carbide ni o dara fun machining ni ga awọn iwọn otutu ati ki o le wa ni produced bi gige irinṣẹ, igbekale ohun elo fun kilns, jet enjini, gaasi turbines. , nozzles, ati be be lo.
| Orukọ ọja | Chromium carbidi lulú-WC-CrC-Ni |
| Tungsten carbide lulú jara | WC-NI10 WC-CrC-Ni WC-Co8 WC-Co12 WC-Co17 WC-Co10Cr4 |
| Ohun elo | Cr20,Ni7.0C5.8,W |
| Ijẹrisi | ISO9001 |
| Ibi ti Oti | Deyang, China |
| owo | 1-5kg: idiyele ayẹwo lori 5kg: idiyele olopobobo |
| iṣẹ wa | Isọdi ọja, ipasẹ aṣẹ, ayewo didara meji, ijabọ ile-iṣẹ |
| Iwọn | -325mesh / + 15um; -45um / + 15um |
| anfani | antioxidant ti o dara julọ ati ipata |
| Lilo naa | Plasma, HVOF |
| Apeere | Wa |
| Lile (HV) | 1200 |
| Ilana ti ipilẹṣẹ | Agglomerate sintering |
Apejuwe: WC-Co10Cr4 jẹ lulú ti o da lori tungsten lile lile, eyiti o gba ilana agglomeration ati sintering. O jẹ Layer cobalt irin ti a bo lori dada ti simẹnti tungsten carbide fun aabo ati isunmọ, eyiti o ni resistance to dara julọ si yiya abrasive ati abrasion. Agbara lati koju ifoyina otutu otutu. Dara fun pilasima spraying tabi supersonic spraying ilana. Ti a lo ni igbagbogbo ni awọn iṣẹlẹ ti o nilo atako yiya ti o lagbara, gẹgẹbi awọn awo itọnisọna, awọn ọpa, awọn ibi idalẹnu lile, ati bẹbẹ lọ.
Ipilẹ kẹmika lulú: 86%(WC)+10%(Co)+4%(Cr)
Lile ti sokiri alurinmorin Layer: Hv200>1100
Awọn nkan ti o nilo akiyesi: 1. Awọn lulú ti pin si meji powders fun pilasima spraying ati supersonic spraying.
2. Jọwọ ṣiṣẹ ni ibamu ti o muna pẹlu awọn ibeere ti ilana isunmi ti o baamu, ati iwọn patiku lulú le ṣe atunṣe.
3. Ti lulú ba gba ọrinrin, o yẹ ki o gbẹ ṣaaju lilo
| Oruko | Tungsten carbide Alloy lulú |
| Oruko miiran | Tungsten carbide lulú, WC-Co10-Cr4 |
| CAS RARA. | 12070-12-1 |
| Fọọmu | WC-Co10-Cr4 |
| EINECS Bẹẹkọ. | 235-123-0 |
| HS koodu | 2849902000 |
| Ipele | Ipilẹ ile-iṣẹ |
| Lo / Ohun elo | spraying, aso, Simẹnti, Metallurgical |
| Package | Barrel,Ilu Iron, garawa ṣiṣu |
O ti wa ni lilo pupọ ni awọn irinṣẹ gige iyara giga, awọn ohun elo ileru, awọn paati ẹrọ jet, awọn ohun elo seramiki irin, awọn eroja alapapo resistance, bbl
O ti wa ni lo lati lọpọ awọn irinṣẹ gige, wọ-sooro awọn ẹya ara, yo crucibles ti Ejò, koluboti, bismuth ati awọn miiran awọn irin, wọ-sooro semikondokito fiimu.
Seramiki atomspheric pilasima sokiri ti o gbona sokiri apakan ti a bo HVOF ti a bo lulú sokiri waya metallizing thermal sokiri bo oxide powder EB-PVD bo ooru resistance ipata resistance kemikali iduroṣinṣin Anti-plasma ogbara resistance flouridation resistance seramiki lulú catalysts pilasima sokiri bo fun ologbele-adaorin.
01
