Mr. Perry Wu International Sales Director
Tungsten Carbide
- Oloa
- Alamanuia Zirconia
- Oloa Eleele Seseasea
- Alumina
- Carbide
- Nitride
- Oloa Keramiki
- Oloa Graphite
- Nano Mea
- Mea Fa'asa'o Spherical
- U'amea U'amea Mamalu Maualuga
- Hot Fa'atau Atu Mea Fa'apitoa
01
Fa'amama Tungsten Powder Tungsten Carbide Powder Ultra-Fine Tungsten Powder
| Fa'atatauga | Fufulu vevela, Mea fa'apipi'i |
| foliga | Pa'u ta'amilosaga, Pa'u spherical |
| Mea | Cr20,Ni7.0C5.8,W, Cr20,Ni7.0C5.8,W |
| Igoa o oloa | Chromium carbidi paʻu-WC-CrC-Ni |
| Tusipasi | ISO9001 |
| Lanu | Lanu efuefu |
| Fa'aaliga foliga | 4.3-4.8g/cm3 |
| manuia | sili atu antioxidant ma anti-corrosion |
| fa'ata'ita'iga | Avanoa |
| MOQ | 1kg |
| Fa'atatauga | Fa'asalaina i luga, Alamanuia Suau'u |
| foliga | pauta |
| Mea | Tungsten Carbide |
| Fa'asu'esu'ega o vaila'au | W/99.8;S/0.05max;P/0.07max |
| Igoa o oloa | Fa'atau atu Fa'amea vevela Fused WC Tungsten Carbide Pa'u mo le su'iina |
| Fa'atatauga | maualuga le liusuavai, lelei le faatinoga i luga o le ofuina |
| Lanu | Silver Grey |
| Fua | 0.38~0.85mm |
| Mama | 95% |
| Igoa Fa'ailoga | HR |
| upu autu1 | tungsten carbide wc pauta |
| upu autu2 | tungsten carbide pauta metallurgy |
| upu autu3 | wc pauta |
01
WC-Co10Cr4 o se paʻu faʻapipiʻi faʻavae tungsten maualuga, lea e faʻaaogaina ai le faʻapipiʻiina ma le sintering. O se u'amea cobalt layer ufiufi i luga o le lafo tungsten carbide mo le puipuiga ma le fusia, lea e sili ona tetee i abrasive ofu ma abrasion. Le gafatia e tetee atu i le vevela maualuga oxidation. E fetaui lelei mo le faʻapipiʻiina o le plasma poʻo le supersonic spraying process. E masani ona faʻaaogaina i taimi e manaʻomia ai le malosi o le ofuina, e pei o laupepa taʻiala, faʻamau, faʻamaufaʻailoga malo, ma isi.
Pa'u vaila'au vaila'au: 86%(WC)+10%(Co)+4%(Cr)
Ma'a'a ole fa'apipi'i fa'apipi'i: Hv200>1100
Mataupu e mana'omia le gauai atu: 1. Ua vaevaeina le pauta i ni pauta se lua mo le fa'auluina o le plasma ma le fa'aosoina o le supersonic.
2. Fa'amolemole fa'atino e tusa ai ma mana'oga o le fa'aogaina o le fa'agasologa, ma e mafai ona fetu'una'i le tele o le pa'u.
3. Afai o le paʻu e mitiia le susu, e tatau ona faʻamago aʻo leʻi faʻaaogaina
Fused WC Tungsten Carbide Pa'u Fa'avevela mo le su'iina
SUOYI ofo atu ituaiga e tolu o WC paʻu ma le tele o vaega eseese mo eseese
1. Tu'u WC pa'u
2. Spherical lafo WC paʻu
3.Macro-crystal WC paʻu
Lapopo'a: 1-3um,10-38um.15-45um.15-53um....po'o le lapopoa fa'apitoa.
Tungsten carbide compund pauta pei ole wc-12co/17co WC-Ni
| Tu'u WC Tungsten Carbide pa'u fa'afefiloi -% | ||||
| Vasega | WC-40100 | WC-40130 | WC-40140 | WC-40150 |
| IN | 95-96 | 92-93 | 91-92 | 90-91 |
| TC | 3.8-4.1 | 3.8-4.1 | 3.8-4.1 | 3.8-4.1 |
| FC | ≦0.08 | ≦0.08 | ≦0.08 | ≦0.08 |
| O | ≦0.1 | ≦0.1 | ≦0.1 | ≦0.1 |
| I totonu | / | 2.5-3.5 | 3.5-4.5 | 4.5-5.5 |
| Cr | ≦0.1 | ≦0.1 | ≦0.1 | ≦0.1 |
| IN | ≦0.05 | ≦0.05 | ≦0.05 | ≦0.05 |
| Ma | ≦0.02 | ≦0.02 | ≦0.02 | ≦0.02 |
| Fe | ≦0.3 | ≦0.3 | ≦0.3 | ≦0.3 |
| O | ≦0.05 | ≦0.05 | ≦0.05 | ≦0.05 |
WC CrC Ni ose maualuga maaa chromium nickel carbide ufiufi paʻu. E faʻaaogaina agglomeration sintering process.It e masani ona faʻaaogaina i le vevela vevela poʻo i tulaga e manaʻomia ai le malosi o le ofuina. Tungsten carbide e talafeagai mo masini i le vevela maualuga ma e mafai ona gaosia e pei o meafaigaluega tipi, mea faʻavae mo kilns, afi afi, turbines gas. , nozzles, etc.
| Igoa o oloa | Chromium carbidi paʻu-WC-CrC-Ni |
| Tungsten carbide pauta faasologa | WC-NI10 WC-CrC-Ni WC-Co8 WC-Co12 WC-Co17 WC-Co10Cr4 |
| Mea | Cr20,Ni7.0C5.8,W |
| Tusipasi | ISO9001 |
| Nofoaga na tupuga mai ai | Deyang, Saina |
| tau | 1-5kg: tau faʻataʻitaʻiga i luga ole 5kg: tau tele |
| la matou auaunaga | Fa'asologa o oloa, siaki fa'atonuga, fa'aluaina su'esu'ega lelei, lipoti fale gaosimea |
| Tele | -325mesh/+15um; -45um/+15um |
| manuia | sili atu antioxidant ma anti-corrosion |
| Le fa'aoga | Plasma,HVOF |
| Fa'ata'ita'iga | Avanoa |
| Malosi(HV) | 1200 |
| Fa'agasologa o le fa'atupuina | Fa'apipi'i fa'atasi |
Faʻamatalaga: WC-Co10Cr4 o se paʻu faʻapipiʻi faʻapipiʻi tungsten maualuga, lea e faʻaaogaina ai le faʻapipiʻiina ma le sintering. O se u'amea cobalt layer ufiufi i luga o le lafo tungsten carbide mo le puipuiga ma le fusia, lea e sili ona tetee i abrasive ofu ma abrasion. Le gafatia e tetee atu i le vevela maualuga oxidation. E fetaui lelei mo le faʻapipiʻiina o le plasma poʻo le supersonic spraying process. E masani ona faʻaaogaina i taimi e manaʻomia ai le malosi o le ofuina, e pei o laupepa taʻiala, faʻamau, faʻamaufaʻailoga malo, ma isi.
Pa'u vaila'au vaila'au: 86%(WC)+10%(Co)+4%(Cr)
Ma'a'a ole fa'apipi'i fa'apipi'i: Hv200>1100
Mataupu e mana'omia le gauai atu: 1. Ua vaevaeina le pauta i ni pauta se lua mo le fa'auluina o le plasma ma le fa'aosoina o le supersonic.
2. Fa'amolemole fa'atino e tusa ai ma mana'oga o le fa'aogaina o le fa'agasologa, ma e mafai ona fetu'una'i le tele o le pa'u.
3. Afai o le paʻu e mitiia le susu, e tatau ona faʻamago aʻo leʻi faʻaaogaina
| Igoa | Tungsten carbide Alloy pauta |
| Isi Suafa | Tungsten carbide pauta,WC-Co10-Cr4 |
| CAS NO. | 12070-12-1 |
| Fuafuaga | WC-Co10-Cr4 |
| EINECS NO. | 235-123-0 |
| HS Code | 2849902000 |
| Vasega | Alamanuia-vaega |
| Fa'aoga/Talosaga | fa'asalaina, fa'apipi'i, lafo, metallurgical |
| afifi | Paelo, Pa'u U'amea ,Pakete Palasitika |
E masani ona faʻaaogaina i meafaigaluega tipi saosaoa, mea faʻapipiʻi ogaumu, vaega afi afi, mea faʻamea uʻamea, elemene faʻavevela tetee, ma isi.
E faʻaaogaina e gaosia ai meafaigaluega tipi, mea e faʻafefeteina, faʻafefeteina o kopa, cobalt, bismuth ma isi uʻamea, ata tifaga semiconductor faʻafefe.
Ceramics atomspheric plasma spray coating thermal spray part coating HVOF coating powder spray wire metallizing thermal spray coating oxide pa'u EB-PVD fa'apipi'i vevela fa'a'a'ala'au mautu vaila'au fa'ato'a fa'a'ele'ele fa'a'ele'elea fa'a'ele'ele'elea fa'ato'a fa'aulu fa'aulu plasma mo semi-conductor.
01
